Can be combined with an Absorber energy absorber to set up an energy-absorbing I or Y lanyard with a maximum length of 2 m. Sewn ends protected by plastic sheath to hold the connector in place and protect the ends from abrasion. May be used with an MGO Open 60 connector with very large gate opening for connection to metal structures or to large-diameter cables and bars.
LANYARD WITH ENERGY ABSORBER
Connects the ASAP or ASAP Lock mobile fall arrester to the harness. Allows the user to distance themself from the rope in order to declutter the work area and protect the rope. Absorbs the energy of a fall by the tearing of
specific stitching. Available in (2) lengths for a choice of the best balance between distance from the rope and reducing the fall length. 308 lbs weight capacity. Lacks sufficient energy absorption to safely arrest the potential energy during a two-person rescue.
Tear-webbing energy absorber, for use in combination with a Jane rope lanyard to make an energy-absorbing lanyard. Maximum length of two meters. Ends equipped with string to hold the connector in position and protect the sling from abrasion. Compact and lightweight. 551 lbs weight capacity. If using the ASAP or ASAP Lock in two-person rescue technique, an Absorber must be used as an energy absorber. Lacks sufficient energy absorption to safely arrest the potential energy during a two-person rescue.
Lanyard Extender for Full Body Harnesses it can simplifies disconnecting from all fall protection devices
1. frequent connecting and disconnecting takes place
2. self retracting lifelines in confined spaces where the
user may not have assistance,
3.wearing an SCBA or similar device.
4.work on order pickers orsimilar types of equipment.
1.1-3/4” nylon web
2.Quicklink screwlock connector.
3. The D-ring is a
Adds Lanyard Length
fort for confined spaces or areas where frequent connect/disconnect occurs.
Light and Can be replace fore shock absorbing